Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-19-2016, 08:56 AM   #1
cuzncletus
Senior Member
 
cuzncletus's Avatar
 
Join Date: Aug 2010
Location: Sevierville, Tenn.
Posts: 391
Default synthetic fluids

Is there an issue with running synthetic fluids in my 39 trans and diff? I've had very good luck with them in some older drivetrains though none as old as this. The difference in ease of shifting has been noticeable. A balky synchro ring that used to make me gingerly shift into second now shifts quickly and quietly. I was hoping for the same results in my old Ford driveline.
cuzncletus is offline   Reply With Quote
Old 10-19-2016, 09:13 AM   #2
rockfla
Senior Member
 
rockfla's Avatar
 
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 4,807
Default Re: synthetic fluids

My dad has used STP in our gear boxes from 32 to 48, they never shifted smoother and better in their entire history. Just take the shifter top off and pour into the trans.
rockfla is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-19-2016, 09:17 AM   #3
JSeery
Member Emeritus
 
JSeery's Avatar
 
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
Default Re: synthetic fluids

Quote:
Originally Posted by cuzncletus View Post
Is there an issue with running synthetic fluids in my 39 trans and diff? I've had very good luck with them in some older drivetrains though none as old as this. The difference in ease of shifting has been noticeable. A balky synchro ring that used to make me gingerly shift into second now shifts quickly and quietly. I was hoping for the same results in my old Ford driveline.
I would think they should be fine as long as they are "yellow" metal safe.
JSeery is offline   Reply With Quote
Old 10-19-2016, 04:05 PM   #4
Bored&Stroked
Senior Member
 
Bored&Stroked's Avatar
 
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,723
Default Re: synthetic fluids

One thing to note is that in some cases the overall gear lube 'weight' might be a bit thin for an early transmission - as the clearances for the cluster and reverse main shafts can be enough to let the fluid seep out. There are no o-rings, gaskets or other sealing mechanisms to keep the lubrication fluids from running past the case holes where the shafts poke through. So it can depend on the overall case conditions, shaft conditions and whether or not the trans were rebuilt with shafts that are smaller in OD than stock (which almost all replacement shafts suffer from - a .002 smaller diameter).

You may find that the transmission tends to leak a lot more with a syn fluid - so just keep that in mind.
Bored&Stroked is offline   Reply With Quote
Old 10-19-2016, 05:53 PM   #5
A bones
Senior Member
 
A bones's Avatar
 
Join Date: May 2010
Location: CLAYTON DE
Posts: 1,350
Default Re: synthetic fluids

Look for code #GL4
__________________
Enjoy yer day. Tom
Hate can't fix what it started.
A bones is offline   Reply With Quote
Old 10-19-2016, 07:15 PM   #6
lotsagas4u
Senior Member
 
Join Date: Apr 2011
Location: Plainview, Texas
Posts: 774
Default Re: synthetic fluids

Sponsored Links (Register now to hide all advertisements)
Stalube 140wt,#GL4 at your local Napa
lotsagas4u is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:17 PM.