|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: May 2010
Location: Winnsboro, Texas
Posts: 463
|
![]()
Is the gas cut off valve suppose to have a spring in it. Charles
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,558
|
![]()
there is NO spring in any Model A gas shut off valve that I have ever seen.
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: Jun 2010
Location: San Diego, CA
Posts: 1,490
|
![]()
On the early style shut off valves, there is a small spring under the brass screw-on cap.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2010
Location: Pine, AZ
Posts: 801
|
![]()
My '28 A has a spring under the cap like Gary Karr says. If the inside is not scored can burnish the two mating surfaces of the cut off with tooth paste after draining the tank. Then clean the cutoff good with lacquer thinner to make sure no residue.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2010
Location: Winnsboro, Texas
Posts: 463
|
![]()
Where can I purchase a spring. Bratton does not show a spring. Charles
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: May 2010
Location: Winnsboro, Texas
Posts: 463
|
![]() Sponsored Links (Register now to hide all advertisements)
Charles |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|