|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-07-2014, 02:17 PM | #1 |
Member
Join Date: Jan 2011
Location: Cape Coral, Fl
Posts: 75
|
Deluxe tudor drivers seat
Is there supposed to be a block of wood under each side of the drivers seat on a 1931 Tudor? I have one on each side and just wondered and if anyone has a picture would appreciate it. Thanks
|
09-07-2014, 05:08 PM | #2 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Deluxe tudor drivers seat
Do you mean where the seat rests on the floor? The seat should just have a metal leg with a pivot joint at the top for the front. At the rear the seat should rest on metal cups attached to the seat, if it's the same as my 29 Tudor.
|
Sponsored Links (Register now to hide all advertisements) |
|
09-07-2014, 05:15 PM | #3 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: Deluxe tudor drivers seat
here is a tudor seat it has just a wood frame with legs as tom mentioned...
|
09-07-2014, 05:40 PM | #4 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,398
|
Re: Deluxe tudor drivers seat
Did not the deluxes have an adjustable driver's seat??
Paul in CT |
09-08-2014, 11:17 AM | #5 |
Senior Member
Join Date: Jan 2013
Location: tucson
Posts: 136
|
Re: Deluxe tudor drivers seat
The Deluxes did have a sliding seat that began being reproduced in the late 90s. It is a saw tooth design that turns a quarter turn( handle in front of the lower seat) to lock/unlock in the position desired, as the seat slides on a track .I never saw blocks but it might be a custom set up to stabilize the tracks or risers. The driver sliding seat is fastened to the floor and does not "roll" forward. Only the seat back tips forward, so rear passengers must enter on the right side. Carpets need to be made for the Tudor Deluxe exclusively.
|
09-08-2014, 12:46 PM | #6 | |
Junior Member
Join Date: Aug 2010
Location: North Co.
Posts: 19
|
Re: Deluxe tudor drivers seat
Sponsored Links (Register now to hide all advertisements)
Quote:
2 wood blocks 16" x 2" - tapered to 2" - 3/8" 1 wood block [front] for L bracket tapered 2 1/4" - 1 1/2" I extended 1/4" mounting bolts of steel slider to 4" ,3" & 2 1/4" welded on |
|
09-08-2014, 01:17 PM | #7 |
Member
Join Date: Jan 2011
Location: Cape Coral, Fl
Posts: 75
|
Re: Deluxe tudor drivers seat
Thanks
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|