|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Jan 2022
Posts: 889
|
![]()
I’m looking for a source for the lower rear tube shock mounts that are of the same style as the F-1 mounts commonly used for the upper front. I purchased a set a few years ago but can’t remember where I bought them. I found that an outfit called “Pure Hot Rods” carried them but it appears that they have closed up (phone disconnected and nothing current on their FaceBook page).
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jan 2012
Location: Western North Carolina
Posts: 5,872
|
![]()
Jeep, I am not sure if this will help you, but I have a set of lower rear mounts that are left over from a kit from Snyders. These are heavy duty. They are as shown in Figure 6 in the instructions, see https://www.snydersantiqueauto.com/c...Fs/A-18014.pdf I can sell them to you for $40 plus shipping.
__________________
A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past. |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: Jan 2022
Posts: 889
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|