The Ford Barn

firetique57 · 05-01-2013, 12:27 PM

I asked this over on the HAMB site with no replies so I thought I'd ask here.
I'm rebuilding a 30/31 Model A frame. Just got the frame back from sand blasting and I'm ready to start re-assembly. I'm thinking of going with juice brakes instead of the mechanical. Should I change the king pins to do away with the cup for the brake actuator and if so which king pins will work with a stock Model A axle and spindles? I've read the other threads here about mechanical vs hydraulic brakes and I'm not debating pros or cons just interested in the king pin issue at the moment. Thanks!
Andy

05-01-2013, 12:27 PM	#1
firetique57 Senior Member Join Date: Jul 2011 Location: Walkertown, NC Posts: 105	King pin question I asked this over on the HAMB site with no replies so I thought I'd ask here. I'm rebuilding a 30/31 Model A frame. Just got the frame back from sand blasting and I'm ready to start re-assembly. I'm thinking of going with juice brakes instead of the mechanical. Should I change the king pins to do away with the cup for the brake actuator and if so which king pins will work with a stock Model A axle and spindles? I've read the other threads here about mechanical vs hydraulic brakes and I'm not debating pros or cons just interested in the king pin issue at the moment. Thanks! Andy

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode