'30 Tudor Glass Sizes

[Lembomw]

I have a 1930 Tudor that I am almost done rebuilding. It is time to order new glass. I want to go with clear laminated safety glass for the windshield, and tempered light gray tint for the rest of the windows.

I have looked at a few vendors (Sanders Reproduction Glass, Classic Flat Glass, Vintage Glass USA) as well as Bratton, Mac’s and Mike’s. What has me concerned is that when I measure the plate glass that I removed from the car the measurements are different from those given by Sanders and Classic Flat Glass. Mac’s, Bratton and Mike’s do not give the sizes for the glass.

For example, my old door glass measures 26 ¾ x 16 ½. Sanders is 28 x 16, and Classic is 28 x 18.

My old quarter glass is 30 5/8 x 16 3/8, Sanders and Classic is 32 x 16.

I have been looking for the exact sizes that all the glass is suppose to be but can’t find an “official” source. I do not have any of the Service Bulletins, and from reading past threads on this subject there seems to be some differences in them also.

Does anyone happen to have all the actual glass sizes so that I can start out with good information?

Thank you for your help.

Mark