|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-23-2024, 07:31 PM | #1 |
Member
Join Date: Apr 2024
Location: CT
Posts: 52
|
Radiator Bracket Repair
The top radiator support rod bracket has come loose from the tank on my radiator. It should just need to be cleaned up good and resoldered but I’m worried about the heat affecting the neck and inlet tube solder. Has anyone done this repair? How did you contain the heat? I was considering trying some thermo-trap type heat sink material that I have at my shop for welding but wasn’t sure how well it would work a solder melt-point temperatures. I have my doubts about a wet rag working because it’s a big area that needs to be heated.
|
05-23-2024, 09:21 PM | #2 | |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,184
|
Re: Radiator Bracket Repair
Quote:
__________________
www.whidbeymodelaclub.com |
|
Sponsored Links (Register now to hide all advertisements) |
|
05-24-2024, 03:02 PM | #3 |
Senior Member
Join Date: May 2011
Location: Elyria, Ohio
Posts: 767
|
Re: Radiator Bracket Repair
Sponsored Links (Register now to hide all advertisements)
Marty |
|
|
Sponsored Links (Register now to hide all advertisements) |
|