View Single Post
Old 07-25-2025, 10:07 AM   #2
dmsfrr
Senior Member
 
dmsfrr's Avatar
 
Join Date: Aug 2012
Location: Abq, NM
Posts: 3,725
Default Re: Aftermarket Mechanical Temp Gauge Hookup Location

Yes the CVR for the gauges may be failing or has already failed.


The only(?) drawback to that spot on the water pump is it's the inlet to the engine from the radiator... so it will always indicate 20 or as much as 30 degrees cooler than the coolant temperature in the engine. Even lower / worse if the thermostat happens to stick shut or the radiator is obstructed.

It's not necessarily a 'bad' place to locate the sensor, just something to be aware of.
.

Last edited by dmsfrr; 07-25-2025 at 11:23 AM.
dmsfrr is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)