02-25-2024, 06:40 AM
|
#1
|
|
Senior Member
Join Date: May 2010
Location: Anderson, Texas
Posts: 287
|
Re: Rotor position at TDC
Quote:
Originally Posted by y-blockhead
nope. The slot on the bottom of the distributor is offset. The distributor will only drop down into the slot in one position. If he is 180° off he will have to loosen the rotor and turn just the rotor 180° to line up with tdc on #1 compression stroke. No need to lift the distributor.
|
bingo
|
|
|