View Single Post
Old 08-29-2022, 04:02 AM   #5
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,184
Default Re: Technical: Electrical- testing for solenoid or starter switch problem

Quote:
Originally Posted by phartman View Post
Thinking it was the starter solenoid, I replaced it. When I turn the key now and lift the ignition lever, at first I heard the solenoid click; now it buzzes as soon as I lift the starter lever.

Where should I begin my diagnosis? Bad ignition switch? Bad starter solenoid?
Not sure what my next step should be?
There are quite a few DIFFERENT solenoids available. The one you want will be electrically wired as below.




Something like this Cole-Hersee (Click the link BELOW):

https://www.amazon.com/Continuous-Te...762603&sr=8-14




You must also make sure to wire BATT to the proper BIG LUG....it makes a difference!


"BAT" Marking....

__________________
Click Links Below __


'35-'36 W/8BA & MECHANICAL FAN


T5 W/TORQUE TUBE
V8COOPMAN is offline   Reply With Quote