The Ford Barn - View Single Post

glennpm · 07-19-2022, 06:04 AM

This bolt pattern jig is a good option if the diameter of the bolt surface of the rotor is large enough and the wire wheel bolt circle has sufficient contact to the re-drilled rotor.

https://m.roadkillcustoms.com/wheel-...ill-guide-jig/

07-19-2022, 06:04 AM	#42
glennpm Senior Member Join Date: Sep 2014 Location: Mid-Coast Maine Posts: 2,815	Re: What Master Cylinder This bolt pattern jig is a good option if the diameter of the bolt surface of the rotor is large enough and the wire wheel bolt circle has sufficient contact to the re-drilled rotor. https://m.roadkillcustoms.com/wheel-...ill-guide-jig/ Last edited by glennpm; 07-19-2022 at 08:20 AM.