The Ford Barn - View Single Post

George Miller · 01-19-2015, 06:21 PM

By the way the copper end of the condensor where the screws that holds it, spins.

That is not a good thing, you need to replace it. But if you get a good blue spark on 2,3,4 you have points that are not opening on one cylinder, or you got a bad dist body. Need to check play in dist shaft, make sure the points are opening on all 4 cam positions.

01-19-2015, 06:21 PM	#3
George Miller Senior Member Join Date: May 2010 Location: NC Posts: 2,975	Re: Still won't start By the way the copper end of the condensor where the screws that holds it, spins. That is not a good thing, you need to replace it. But if you get a good blue spark on 2,3,4 you have points that are not opening on one cylinder, or you got a bad dist body. Need to check play in dist shaft, make sure the points are opening on all 4 cam positions.