| ford1 |
06-27-2011 09:29 PM |
Re: cowl light template
there is a hole in the body support under the fuel tank inside the car on both sides of the body cowl, its there to locate the position of the cowl lite, make a wooden dowl about an inch long the same size of that hole, drill a 1/4" hole in the center of the your dowl, put it in the hole under tank and use it to locate the center where you want to drill a small hole, use a center punch thru the dowl to mark the spot where to drill, drill from inside out, then use a larger hole from the out side to prevent chipping the paint you will have to put a spacer between the brace and body cowl to take up the space, if you dont you will bend the body cowl
|
