The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   1947 17" Tonner wheels/Cap retainer clips (https://www.fordbarn.com/forum/showthread.php?t=350566)

rawlir 07-07-2025 08:26 PM

1947 17" Tonner wheels/Cap retainer clips
 

1 Attachment(s)
Howdy!
Anyone have a Tonner pickup wheel either for sale or a donner wheel to recover 2 hubcap retainer clips....all i need is 2 clips, can't find anyone who sells them, they are riveted to the wheel, any leads appreciated!
Thank you!
Rick [email protected]

38 coupe 07-07-2025 08:34 PM

Re: 1947 17" Tonner wheels/Cap retainer clips
 

Have you tried contacting GB Sisson here on the Ford Barn? He has more experience with 3/4 and 1 ton flathead trucks than anyone else I know.

51504bat 07-07-2025 08:41 PM

Re: 1947 17" Tonner wheels/Cap retainer clips
 

I'm assuming that the ones for the wide fives on a 1/2 ton are different?


Bob Drake Wheel Spider Clips 68-1034

Bob Drake Reproductions 68-1034 Bob Drake Wheel Spider Clips | Summit Racing

petehoovie 07-07-2025 09:12 PM

Re: 1947 17" Tonner wheels/Cap retainer clips
 

Quote:

Originally Posted by rawlir (Post 2399312)
Howdy!
Anyone have a Tonner pickup wheel either for sale or a donner wheel to recover 2 hubcap retainer clips....all i need is 2 clips, can't find anyone who sells them, they are riveted to the wheel, any leads appreciated!
Thank you!
Rick [email protected]

https://www.fordbarn.com/forum/attac...5&d=1751937933

rawlir 07-07-2025 09:29 PM

Re: 1947 17" Tonner wheels/Cap retainer clips
 

Both GREAT suggestions, Just sent an email to Gary (can't believe i did not think of him!) Just googled Drake clips, will call them, those clips look close, website does not include them for 1947 BUT they may well be right!
THANK YOU!


Rick

Bob C 07-07-2025 10:27 PM

Re: 1947 17" Tonner wheels/Cap retainer clips
 

One ton part is 82Y-1034.

truckdog62563 07-07-2025 10:41 PM

Re: 1947 17" Tonner wheels/Cap retainer clips
 

Yes, I cited the 82Y 1034 in my early on email to Rick. None of the online sellers (Parts Voice, Rear Counter, Green) have any. I suggested then, and suggest now, one of the various reproduction clips sold by a number of vendors on Amazon, eBay, and other sellers found on Google. Are these clips that unique that a rare wheel must be sacrificed to remedy this? I would hope not. Stu

cas3 07-07-2025 11:20 PM

Re: 1947 17" Tonner wheels/Cap retainer clips
 

I would bet some one has a rusted out junk wheel so a rare-good wheel would not be in danger. Just a matter of who reads this. How about Fred, barnfind08 on the barn here?

GB SISSON 07-08-2025 12:23 AM

Re: 1947 17" Tonner wheels/Cap retainer clips
 

Late to the party! Just saw this. Been up to my neck in relatives for a week. Should have a couple, will check tomorrow!

rawlir 07-08-2025 08:56 AM

Re: 1947 17" Tonner wheels/Cap retainer clips
 

Morning, all!
I would not use/sacrifice a usable wheel just to harvest the clips, was only wondering if someone might have a wheel that had a major defect....Stu & Gary are our mentors on this subject...great day everyone!!

Newc 07-08-2025 12:38 PM

Re: 1947 17" Tonner wheels/Cap retainer clips
 

Chuck's Trucks ??? Newc

GB SISSON 07-08-2025 11:00 PM

Re: 1947 17" Tonner wheels/Cap retainer clips
 

News from this end not good. I found the two rusty wheels I have beewn using for clip donors and none left on them. Between two tonner trailers, a rolling chassis and a complete parts truck I only found one wheel that looked rusty enough to steal clips from. This was on the chassis and in a tough spot to chisel clips or remove the wheel. Looks like I am out of the running on donor clips. Sorry

expavr 07-10-2025 07:24 PM

Re: 1947 17" Tonner wheels/Cap retainer clips
 

1 Attachment(s)
Quote:

Originally Posted by rawlir (Post 2399312)
Howdy!
Anyone have a Tonner pickup wheel either for sale or a donner wheel to recover 2 hubcap retainer clips....all i need is 2 clips, can't find anyone who sells them, they are riveted to the wheel, any leads appreciated!
Thank you!
Rick [email protected]


If you're still looking for 17" cap clips I may have them. Attached is a photo of a 17" rim for a 1940 Tonner. I can't tell if they're the same, but if so you're welcome to 2 of them. These look a little gnarly, but might clean up.

petehoovie 07-10-2025 08:56 PM

Re: 1947 17" Tonner wheels/Cap retainer clips
 

Quote:

Originally Posted by expavr (Post 2399908)
If you're still looking for 17" cap clips I may have them. Attached is a photo of a 17" rim for a 1940 Tonner. I can't tell if they're the same, but if so you're welcome to 2 of them. These look a little gnarly, but might clean up.

https://www.fordbarn.com/forum/attac...8&d=1752193398

rawlir 07-10-2025 09:30 PM

Re: 1947 17" Tonner wheels/Cap retainer clips
 

Hello, Pete,
I am very interested, THANK YOU.....Can i ask:
Is this a DONOR wheel? It looks just like mine....Hate to ruin a wheel that MIGHT still do what wheels do...What might you want for it OR for clips if it is a Donor wheel?I see you are a fellow Washingtonian, we need to compare trucks!
Sending you a PM....Rick

petehoovie 07-10-2025 11:35 PM

Re: 1947 17" Tonner wheels/Cap retainer clips
 

Quote:

Originally Posted by rawlir (Post 2399937)
Hello, Pete,
I am very interested, THANK YOU.....Can i ask:
Is this a DONOR wheel? It looks just like mine....Hate to ruin a wheel that MIGHT still do what wheels do...What might you want for it OR for clips if it is a Donor wheel?I see you are a fellow Washingtonian, we need to compare trucks!
Sending you a PM....Rick

Originally Posted by expavr - Not petehoovie https://www.fordbarn.com/forum/hamb/...s/viewpost.gif
If you're still looking for 17" cap clips I may have them. Attached is a photo of a 17" rim for a 1940 Tonner. I can't tell if they're the same, but if so you're welcome to 2 of them. These look a little gnarly, but might clean up.

mercman from oz 07-11-2025 05:21 AM

Re: 1947 17" Tonner wheels/Cap retainer clips
 

https://www.fordbarn.com/forum/attac...p;d=1752229229

Australian 1942 Ford One Ton Express 122" Wheelbase with 17" Wheels

rawlir 07-11-2025 06:24 PM

Re: 1947 17" Tonner wheels/Cap retainer clips
 

Very Nice Tonner!
Were wing windows Period Correct in Aus? how about RED in hubcaps?
Any photos of inside cab, inside bed, engine compartment & truck rear?


All times are GMT -5. The time now is 12:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.