The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   How many amps? (https://www.fordbarn.com/forum/showthread.php?t=346606)

rockfla 02-17-2025 04:07 PM

How many amps?
 

Anyone have a number on just how many Amps a 6V flathead starter draws when it turns under load? Stock configuration

ScubaChief60 02-17-2025 04:32 PM

Re: How many amps?
 

Found this from 2021 on the Forum here: On 6v the draw should be under 450 amps

ford38v8 02-17-2025 05:24 PM

Re: How many amps?
 

Quote:

Originally Posted by ScubaChief60 (Post 2370218)
Found this from 2021 on the Forum here: On 6v the draw should be under 450 amps

Wow. WOW! Like less than half of that. Over 200 amps would mean bad condition of the starter itself, the cables, the battery, or a new rebuild with tight bearings.

Bob C 02-17-2025 06:52 PM

Re: How many amps?
 

From Ford Service Manual 1946-48.

Torque RPM Volts Amps
4 ft. lbs. 1070 4.6 200
8 " 660 4.3 340
12 " 300 3.65 465
14 " Lock 3.5 500


All times are GMT -5. The time now is 08:38 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.