![]() |
Looking for these original OE cage nuts 4 Attachment(s)
Hey guys,
I’m working on putting my 1934 truck cab back together, and I am missing some cage nuts that are riveted into D-shaped holes. Does anyone one know if there is a source for them? I’ve checked a few of the parts suppliers but have only come up with the standard cage nuts or D-clinch nuts. The 1/4-20’s attach the roof to the pillars and the 10-32 hold in the windshield. Please look at the pics to see what I’m after. THANKS! |
Re: Looking for these original OE cage nuts 1 Attachment(s)
Here it is
|
Re: Looking for these original OE cage nuts look up Restorationspecialties.com they have a ton of parts
|
Re: Looking for these original OE cage nuts ALSO, IF you like you can also look at the "weld" style cage nuts there too
https://www.mcmaster.com/products/ca...-snap-in-nuts/ |
Re: Looking for these original OE cage nuts |
Re: Looking for these original OE cage nuts Quote:
|
Re: Looking for these original OE cage nuts They don't rivet into place; you peen them into the pre-punched hole.
|
Re: Looking for these original OE cage nuts The cage nuts need to have the cage welded or spot welded in place. The D-nuts are peened into the D shaped hole and both come in various sizes. You may not find the exactly same cage shape
|
Re: Looking for these original OE cage nuts Try ThirdGen for the D nuts that you are looking for. (not called cage nuts as they are different)
I got the ones I needed from Roy Nacewicz (now sold through Third Gen) years ago. They may have them...... may not. |
Re: Looking for these original OE cage nuts I ordered the D-nuts from Snyders this morning. Before I even made this post I checked all of the suppliers mentioned. Again, my intent was to come up with what was originally in place, not a substitute. The D-nuts should work fine once peened in place.. if they match the existing holes!!! lol it’s always something.
Thanks! |
Re: Looking for these original OE cage nuts Try Granger.com
|
| All times are GMT -5. The time now is 02:36 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.