The Ford Barn - 36 front fender welting?

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - 36 front fender welting? (https://www.fordbarn.com/forum/showthread.php?t=335439)

PGBuick

02-04-2024 02:08 PM

36 front fender welting?

I’m reassembling my 36 and looking for confirmation on correct front fender welting. When I disassembled, there were 3 pieces on each side of black welting with a stainless cap that aligns withe the fender joint. There was no welting on the inner rear part of the fender where it bolts to the lower cowl. Should there be some welting at the rear cowl joint?
Thanks!

Gary Tosel

02-04-2024 02:24 PM

Re: 36 front fender welting?

From my own experience and reviewing original 36 Fords there is no welting between the fender and the lower cowl. Don Rogers should be able to confirm this.

V8ER	02-04-2024 04:35 PM

Re: 36 front fender welting?

There is no welting between the front fender and the lower cowl.

ford nut

02-05-2024 10:34 PM

Re: 36 front fender welting?

Quote:

Originally Posted by V8ER (Post 2288774)

There is no welting between the front fender and the lower cowl.

are you talking about the two bolts that go straight up and into the lower cowl? how about a gasket between the two painted surfaces?

All times are GMT -5. The time now is 08:32 AM.