Brake/clutch return springs hook where?
 

‘39 Standard coupe.

I see in the Green Bible where they hook to the pedals, where does the other end hook onto? Anyone have pictures? Thanks!

Re: Brake/clutch return springs hook where?
 

Look for little tiny holes in frame rails and transmission mounts, for instance. I believe the 1st pic BELOW is a '37 Ford.

https://www.fordbarn.com/forum/attac...9&d=1656181590


I'm pretty sure the 2nd, 3rd and 4th pictures BELOW are '39 Ford.

Coop


https://www.fordbarn.com/forum/attac...0&d=1555335890


https://www.fordbarn.com/forum/attac...3&d=1479532526


https://www.fordbarn.com/forum/attac...6&d=1499725419

Re: Brake/clutch return springs hook where?
 

Same question but on a 40. Is it the same? Thanks!

Re: Brake/clutch return springs hook where?
 

Not the same as 1940. Both the brake and clutch pedal return springs are different. The 40 springs are pictured below

Re: Brake/clutch return springs hook where?
 

https://www.fordbarn.com/forum/attac...6&d=1705346982

https://www.fordbarn.com/forum/attac...7&d=1705346982

Re: Brake/clutch return springs hook where?
 

Thanks for the pictures! I found my hole for the clutch going rearward. It looks lie the first picture is for mechanical brakes, and the rest do not show the brake spring. It will have to hook somewhere forward of the pedals, but I can’t find a logical place it would go. Anybody know?

Re: Brake/clutch return springs hook where?
 

The picture BELOW is for sure of a '39 Ford brake/clutch pedal assembly. It can be clearly seen that the BRAKE spring is the smaller one toward the right in picture and goes to a small hole in lower frame rail.

Coop

https://www.fordbarn.com/forum/attac...6&d=1499525020

Re: Brake/clutch return springs hook where?
 

Now that’s a good picture, thanks! It seems that I am missing some holes in my frame. I’ll drill one. Anyone know the dimensions to locate this hole?

Re: Brake/clutch return springs hook where?
 

The 39 brake and clutch pedal spring are the same. It is pictured below 5.40" OAL. I would not think you have to drill another hole. Are the pedal stop bumpers in place??