The Ford Barn - Door lock cylinder removal

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - Door lock cylinder removal (https://www.fordbarn.com/forum/showthread.php?t=331723)

Door lock cylinder removal

1930 door lock cylinder located in the door panel, not in the handle.
How do I remove it?
I do not have a key and want to bring it to the locksmith to get a key made.

Re: Door lock cylinder removal

Look in the door jamb for a small set screw . You will have to remove it then you can pull the lock straight out .

Re: Door lock cylinder removal

Quote:

Originally Posted by figment (Post 2260520)

Look in the door jamb for a small set screw . You will have to remove it then you can pull the lock straight out .

If it’s a four door, the set screw is actually quite large. I don’t have mine here but it’s like 5/16” or 3/8”. It’s on the door just below the catch.

Once you get it out, look for a key code stamped on the shaft. Your locksmith may be able to translate that to a pin pattern.

If you have an original and can get a key made, go for that. The replacements from the vendors (or at least the one I got) are POS.

Re: Door lock cylinder removal