Wiring harness question
 

Anyone have a recommendation for a wiring harness maker for a 31 coupe??

Re: Wiring harness question
 

Sacramento Vintage.
https://www.vintageford.com/sect_main.cfm?Line=main

Re: Wiring harness question
 

Try Bauer Electronics in Bend Oregon. They have built 2 harness for me. give them 10 stars.. Phone # (541) 389-7755 Rick

Re: Wiring harness question
 

Tyree Harris is another good source. 805-556-5200. He is in Bumpass, VA.

Re: Wiring harness question
 

The harness for my '31 Coupe from Brattons was fine.

Re: Wiring harness question
 

YnZ Yesterdays Parts
https://www.ynzyesterdaysparts.com/
They offer additional options such as turn signal add on wiring, or not depending on your needs.

Re: Wiring harness question
 

I ordered from Tyree recently. Great service and a good part, too. I like supporting the little guy, the independent. My family survived on a small business income.

Re: Wiring harness question
 

Tyree Harris is the man to go to.

Re: Wiring harness question
 

Bauer Electronics fabricates them for several different parts sources. They are decent quality and come with good instruction sheets. All model A harnesses are pretty much the same with exception to some AA trucks due to frame lengths and tail light distance from the light switch. Some have better light switch terminal discs than others. Rhode Island Wire likely makes up the best quality harness but they will likely be a bit more expensive too. They coat the fabric wire covering with a clear coat to keep the color longer Bauer doesn't coat theirs.

Re: Wiring harness question
 

Bratton makes a very good harness, with all the connector ends being soldered, as opposed to Snyders that has clip on ends and no solder in the harness.

Re: Wiring harness question
 

For a show quality harness you cannot beat Tyree Harris. He has done two of them for me.

Re: Wiring harness question
 

Re: Wiring harness question
 

I had an excellent experience with Tyree Harris (also) and was happy I gave him a call. He also custom-made a length I was missing as well.