The Ford Barn - Engine Stand

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - Engine Stand (https://www.fordbarn.com/forum/showthread.php?t=320373)

C1Nelson

11-12-2022 02:34 PM

Engine Stand

I keep reading on here about engine stands such as the ones sold by Berts, or Snyders that bolt to the side of the motor. I have read that is has on the bottom of the mount a flat piece that lays on top of the oil pan rail.

Do the screws with the mount thread into the oil pan screw holes? Does it use two or four screws?

Thanks guys

Chuck

C1Nelson

11-12-2022 02:38 PM

Re: Engine Stand

I found most of the information I needed. The screws thread into two of the oil pan bolt holes. Do I have to remove the oil pan?

Gary WA

11-12-2022 03:39 PM

Re: Engine Stand

need to leave two bolts out for pins to go in

katy	11-13-2022 11:34 AM

Re: Engine Stand

Like this? https://www.snydersantiqueauto.com/p...8613&cat=41910

All times are GMT -5. The time now is 01:42 PM.