Clutch release hub help
 

I recently received my new clutch kit for my 39 style trans. It came complete with a new clutch release hub and bearing. However it’s very different from the original and I’m wondering if I should run the original hub or this new style?

Re: Clutch release hub help
 

Use the original hub but replace the bearing with one that matches your original. The release hub you received is not correct at all never seen one like that for the early Ford transmission.
Ronnieroadster

Re: Clutch release hub help
 

Thank you, I hadn’t either. Not sure what this is for. Clutch and pressure plate look correct but this threw me for a loop. Thank you.

Re: Clutch release hub help
 

Re: Clutch release hub help
 

Where/who did you get the parts from??
Paul in CT

Re: Clutch release hub help
 

I don't see how the clutch fork would or could work on that hub. Tim

Re: Clutch release hub help
 

It’s from rockauto for a 50 ford f1 239 10”

Re: Clutch release hub help
 

Interesting. Have you checked to see if it happens to fit the transmission and clutch fork? I'm just curious.

Also, is this a LONG style clutch, Borg & Beck, or Diaphragm?

Depending on the clutch setup, it may or may not work and it may also be important to understand the LENGTH the clutch requires from the fork front to the PP fingers . . . is this length different with this TO bearing versus the typical ones we're used too?

Re: Clutch release hub help
 

To use it, you would need to add someway for the spring to attach to it. Otherwise, it would have no way to retract accept to use your foot under the pedal.

Re: Clutch release hub help
 

Would that be for a fork type clutch fork ? He said it is for a 239 .

Re: Clutch release hub help
 

Ahh. Maybe. I've never fooled with that style before. The spring is at the fulcrum of the fork, right?

Re: Clutch release hub help
 

I am betting the part number of the kit you bought is 07-516.. If so trash the hub and bearing and buy the appropriate

The kit you bought, again betting I am right on the part number has a great disc, but the pressure plate is marginal but you should be ok.. The hub and bearing WILL NOT WORK!!

Re: Clutch release hub help
 

You need a throwout bearing and hub for a 39 transmission.
Bill

Re: Clutch release hub help
 

The kit I got from rockauto is MU73461B I do have a 39 style hub with a new bearing and spring on the trans so I’ll certainly use that! I appreciate the advice that new bearing and hub threw me for a loop, everything else in the kit looks correct and nice.

Re: Clutch release hub help
 

Will this help?
https://www.youtube.com/watch?v=XkEVJoA4O-A