The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Radiator hoses for 1935 ford (https://www.fordbarn.com/forum/showthread.php?t=315610)

jack99 07-13-2022 12:08 PM
Radiator hoses for 1935 ford
 

Can anyone recommend a source for radiator hoses for a 1935 Ford. I have tried many of the usual sources an all seem to be out of stock. Any help would be appreciated.
Thanks in advance.

Lawson Cox 07-13-2022 01:27 PM
Re: Radiator hoses for 1935 ford
 

Do you have a stock engine? Someone is making a hose for the 35-36 with a later engine with the hose connection in the center of the head.

Kube 07-13-2022 01:49 PM
Re: Radiator hoses for 1935 ford
 

Quote:
Originally Posted by jack99 (Post 2147592)
Can anyone recommend a source for radiator hoses for a 1935 Ford. I have tried many of the usual sources an all seem to be out of stock. Any help would be appreciated.
Thanks in advance.
Jack, Napa sells straight radiator hose by the foot. Just figure out the inside diameter(s) and total length you require.

Jacques1960 07-13-2022 05:53 PM
Re: Radiator hoses for 1935 ford
 

I purchased a set of red line hoses for my ‘36 Phaeton from Joes - good fit, although lower hoses elicited the usual profanity trying to bend the unbendable into a too small space. Note that upper hoses went in without modification while both lower hoses required trimming prior to application of profanity.

ford38v8 07-13-2022 06:59 PM
Re: Radiator hoses for 1935 ford
 

Quote:
Originally Posted by Jacques1960 (Post 2147692)
I purchased a set of red line hoses for my ‘36 Phaeton from Joes - good fit, although lower hoses elicited the usual profanity trying to bend the unbendable into a too small space. Note that upper hoses went in without modification while both lower hoses required trimming prior to application of profanity.

Jacques, Next time that job comes up, simply disconnect the front motor mounts and lift the engine sufficiently to angle a hose onto the inlet/outlet. Then as you lower the engine, that hose knows where it's going. Do one hose at a time, orient the clamps to convenient positions, and while you're at it, replace your mushy old motor mounts.

V8COOPMAN 07-13-2022 07:43 PM
Re: Radiator hoses for 1935 ford
 

Quote:
Originally Posted by ford38v8 (Post 2147718)
Jacques, Next time that job comes up, simply disconnect the front motor mounts and lift the engine sufficiently to angle a hose onto the inlet/outlet. Then as you lower the engine, that hose knows where it's going. Do one hose at a time, orient the clamps to convenient positions, and while you're at it, replace your mushy old motor mounts.

Nahh! That's way TOO easy! Coop

.

OLDMANKOHOUT 07-13-2022 07:46 PM
Re: Radiator hoses for 1935 ford
 

1 Attachment(s)
These are the only sets we have in at the moment

#05729
RADIATOR HOSE SET- FORD SCRIPT - RED STRIPE

1932-36 4 HOSES - 8 CLAMPS FOR STOCK FLATHEAD ENGINE LIMITED STOCK

https://www.vintageford.com/part_sea...5729&Category=

cas3 07-13-2022 11:53 PM
Re: Radiator hoses for 1935 ford
 

I like to use " sil glyde" on hose installations, slides on easy and comes off without a fight years later. Napa brand name, I suppose there are others similar

ford38v8 07-13-2022 11:58 PM
Re: Radiator hoses for 1935 ford
 

Quote:
Originally Posted by cas3 (Post 2147775)
I like to use " sil glyde" on hose installations, slides on easy and comes off without a fight years later. Napa brand name, I suppose there are others similar
From that name, it sounds like silicone, and there isn’t anything better for rubber.


All times are GMT -5. The time now is 01:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.