![]() |
Wheels and tires? What if and after market modern 15" or 16" wheels that will fit in the fender wells?
I looking for something like the look of Cragars. And white walls. Any Sugestions? |
Re: Wheels and tires? I'm running 205-15's on the front and 215-15's on the rear. I have trouble posting pic here but if you want to e-mail me at [email protected],
i can send you one. |
Re: Wheels and tires? You might also post your question on HAMB where you might find more knowledgeable audience for your question.
https://www.jalopyjournal.com/forum/...ssage-board.5/ Charlie Stephens |
Re: Wheels and tires? |
Re: Wheels and tires? Coker has tires in multiple sizes and side walls
I run 15" bias plys white walls 5.90x15 front and 8.20x15 rear. they fit the wells on by 29 nicely. I also use '49 Mercury centers because i prefer the plain hub caps yes it is not completely original, but combined with hydraulic brakes, the car stops much better. https://media.fotki.com/2v2HwRzc5xHuj7.jpg Pretty soon it will be running with a new Burtz block, and better stopping power may be even more important than 21" tires can provide. |
Re: Wheels and tires? I thank you all for your input. but i think i needed to correct myself. I would like to put the spare on/in the front fender well. have a four door and looking to run a trunk on the back.
|
Re: Wheels and tires? Now that you've clarified what you want to do, I don't think you're going to find anything to fit your needs.
Even stock 19" wheels with Firestone's usually have to be put in the wells UN-inflated. Paul in CT |
| All times are GMT -5. The time now is 03:23 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.