![]() |
brake cables ,37 fordor hey folks,need advice,I plan on installing new brake cables and adjustment clevises on my '37 this spring. Iv'e looked at 3 or 4 suppliers and dennis carpenter are either better pics. or are actually better parts than macs/ecklers. iv'e had good luck with some parts from joe's antiques and carpenters. i believe iv'e run out of adjustment on the stretched cables and clevises are bent somewhat on the current cables. i assume the hubs need to come off. should need new outer wheel bearings or just re greased. the car had new brakes installed about 3,000 mi. ago. iv'e seen the pics. this was done just before i purchased the car. any advice for this project greatly apreciated,and which supplier to use. thanks, Tom.
|
Re: brake cables ,37 fordor I suggest checking with Fred at Southside Obsolete or Michael at 3rd Gen Automotive for Ford NOS parts. Or call Mac Van Pelt (www.vanpeltsales.com).
|
Re: brake cables ,37 fordor We have some NOS cables. Did you need front or rear cables?
|
Re: brake cables ,37 fordor I probably have NOS clevises and most internal parts
|
Re: brake cables ,37 fordor Got mine from Pat Day....NOS $5 ea 1972.
Charlie ny |
Re: brake cables ,37 fordor Like any NOS part, NOS cables may have been rejects. Check the length against specs before you install.
|
All times are GMT -5. The time now is 11:05 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.