The Ford Barn - Hand throttle carb connection

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - Hand throttle carb connection - '39 (https://www.fordbarn.com/forum/showthread.php?t=307708)

Cleveland39

12-13-2021 08:43 PM

Hand throttle carb connection - '39

1 Attachment(s)

Who wants to try to explain to me how this throttle connection to my 94 carb on my '39 Standard is supposed to work? This is on the left side of the carb and there is no moving linkage, just the ball on the end of the shaft.

Kube	12-13-2021 09:03 PM

Re: Hand throttle carb connection - '39

2 Attachment(s)

Quote:

Originally Posted by Cleveland39 (Post 2085272)

It appears as if you are missing a piece or more. I have attached two photos for you to compare what you have and what you should have.

deuce_roadster

12-13-2021 09:06 PM

Re: Hand throttle carb connection - '39

Ha ha, Henry Ford Cruise control!! NOT.

rockfla

12-14-2021 12:06 PM

Re: Hand throttle carb connection - '39

3 Attachment(s)

Not sure IF this helps any over what KUBE has already posted but here is the set-up on my 39 Mercury, KUBE, again, can speak to the same or different than the 39 standard Ford BUT here is how it's set up on my Mercury!! SORRY for the "spy phone" 90 degree turn??

All times are GMT -5. The time now is 10:24 PM.