Gorden Smith compressor air pressors
 

Air compressor pressure and engine compression olease.

Re: Gorden Smith compressor air pressors
 

I would have to look at the head I have off, if I remember correctly the combustion chamber looks "B"
For sandblasting it run about 45 psi, I regulate the pressure with governor speed to match diameter of nozzle
When it was running a jackhammer I would crank up the governor never measured rpm, suspect around 1800-2200, pressure regulator would kick unloaders about 125

Re: Gorden Smith compressor air pressors
 

THANK YOU
The GWC Club's runs fine but stalls under load. They think it needs rings??