39/41 rear wheel spats
 

wondering if anyone has photos or set of instructions to fit these made by Fairlane company Fiberglass reproductions from St Johns Mich with the name of
Kieth g Ashley Need to check that all the hardware is there and any mods that need to happen

Re: 39/41 rear wheel spats
 

Picture?

Re: 39/41 rear wheel spats
 

Are we asking about "fender skirts"?

Re: 39/41 rear wheel spats
 

hey 42merc spats/ skirts same thing depends where you are otherwise known as rear wheel covers

Re: 39/41 rear wheel spats
 

Now I am getting confused; I thought "wheel covers" were those fancy "hubcaps" that snapped into the wheel rim and covered the entire inside of the wheel.:confused:

Re: 39/41 rear wheel spats
 

Ford used the term REAR FENDER SHIELDS.

Re: 39/41 rear wheel spats
 

Here are a few picts of the set from my 40. This is the RH side, looking at the inside.
Front, Rear and Center

Re: 39/41 rear wheel spats
 

Muskegon Fan Thanks heaps looks like im only missing the thumb screws in photo 1 shouldnt be to hard to remake THANKS AGAIN

Re: 39/41 rear wheel spats
 

In my part of the world, the Western US, 'Spats' were a white metal cover that attached to the wheel, extending from the rim edge to a mid point on the wheel. They were commonly used during the mid '40's through the mid '50' in lieu of white side walls. I have a nice set of four, 16".
I have a pix in my file, for some unknown reason it would not down load.

Re: 39/41 rear wheel spats
 

Interesting. What does the front screw attach to? I had a Foxcraft (I think) come off in traffic and had to rework the front mounts.

My front mounts are now like the back ones, but there is not a lot of room there, so enquiring minds need to know my options....