The Ford Barn - 39 Ford Hood does not close and fit properly

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - 39 Ford Hood does not close and fit properly (https://www.fordbarn.com/forum/showthread.php?t=303115)

Ramblin Reck

08-29-2021 03:50 PM

39 Ford Hood does not close and fit properly

All four opening and closing hinges are there but do not function properly. I have to move the hood around in a sideways fashion to get it to open and now it closes but there is a large gap on the sides and at the back. Would a new set of hinges solve this problem? Thanks

ORDERED NEW HINGES. WILL ADVISE RESULTS

34PKUP

08-29-2021 05:19 PM

Re: 39 Ford Hood does not close and fit properly

Quote:

Originally Posted by Ramblin Reck (Post 2050969)

Would a new set of hinges solve this problem? Thanks

Most likely not. Unless noticeably damaged
It is a matter of being able to understand what happens when the mounting bolts are loosened and the (2) hinges can be rotated and raised and lowered to give the desired outcome.
The (2) spring supports generally do not come into play for adjustment.

quickchange34

08-29-2021 06:25 PM

Re: 39 Ford Hood does not close and fit properly

You need to set and center the hood first. Then loosen all of your front sheet metal and adjust to fit the hood . Its not easy , it takes time. You may have to open some of the holes .

All times are GMT -5. The time now is 01:37 PM.