The Ford Barn - Removing white letters on plug wires

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - Removing white letters on plug wires (https://www.fordbarn.com/forum/showthread.php?t=27556)

Tom's36coupe

01-31-2011 05:14 PM

Removing white letters on plug wires

I have a new set of Taylor 8mm spark plug wires and would like to remove the lettering that is on them, what works good to get it off without hurting the surface? Lacquer thinner work?

Coupe35

01-31-2011 05:28 PM

Re: Removing white letters on plug wires

I have used lacquer thinner on rubbber fuel line to removed the lettering and it worked fine. Should work on plug wires too.

BUBBAS IGNITION

01-31-2011 06:13 PM

Re: Removing white letters on plug wires

I use brake clean sprayed on a rag......

alanwoodieman

01-31-2011 07:52 PM

Re: Removing white letters on plug wires

goof-off sold in the paint department of about every K-mart, Wall-mart, etc

paul2748

01-31-2011 08:57 PM

Re: Removing white letters on plug wires

I think I used lacquer thinner on mine. Brake clean should work.

All times are GMT -5. The time now is 07:54 AM.