Rear Motor Mount rubber replacement video for you
 

Hey everyone,
While I have my engine out I decided it was time to replace the original and rock hard rear engine mount rubber. I made a little video of the process. It was very straight forward and very easy with the engine out of the way :)

Here is the link:
https://www.youtube.com/watch?v=ucAbLIm1j64

Re: Rear Motor Mount rubber replacement video for you
 

Can you replace the rubber pads without removing the engine?

Re: Rear Motor Mount rubber replacement video for you
 

Yes of course.
You can support the engine with a jack under the pan most likely. then just unbolt the mounts from the flywheel housing.
Try and remove the mount to frame bolts, but in my case all 6 snapped from rust.

Re: Rear Motor Mount rubber replacement video for you
 

I'll make that a winter project.
Thanks.