![]() |
40 carb question and temp sensors Have a 40 fordor deluxe and supposedly a 80hp engine but the carb on it says model 92...is this the wrong carb for the 80hp motor. Also have the original temp sensors and wondered if they would still be good or should i get 2 new ones? Thanks for any help!
|
Re: 40 carb question and temp sensors should only be one temp sensor for 40, carb should say 94 on the carb-how about a picture?
|
Re: 40 carb question and temp sensors That carb is for a 60 hp. The correct one would be a 91-99 which is a Holley 94.
|
Re: 40 carb question and temp sensors The car sat in a barn for 60+yrs. Engine was rebuilt but had 2 temp sensors in it and of course the carb i believe is the wrong one. In my findings i agree it should only have 1 temp sensor. Im trying to upload pic but may gave to email it
|
Re: 40 carb question and temp sensors The heads are also 24 studs
|
Re: 40 carb question and temp sensors Two temp sensors is correct on a '40 flathead. Don't replace either until you are positive it has failed. The commonly available replacements are a crap shoot.
|
Re: 40 carb question and temp sensors Quote:
|
Re: 40 carb question and temp sensors What Ken said x2.
The threaded hole on the pass side head is for the hot water heater shut off valve. |
Re: 40 carb question and temp sensors You can email the photos you what posted and I'll post them for you. [email protected]
|
All times are GMT -5. The time now is 09:16 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.