The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   gas filter (https://www.fordbarn.com/forum/showthread.php?t=216750)

lenmissy 03-15-2017 08:49 AM

gas filter
 

What is a easy way to change gas filter on my 1940 ford without getting gas all over The tank is full.

19Fordy 03-15-2017 09:28 AM

Re: gas filter
 

Where is the filter located?
Buy one of the siphon hoses and empty the tank into another vehicle.
If the line into the filter is rubber, clamp it with a pair of vise grips. Then remove the filter.
Remove the filter and quickly plug the line with a piece of hose plugged with a bolt. You will loose some gas but you can catch it with rags.
If the car is drivable drive it until tank is empty.
The OEM had a drain plug. You could empty the tank into three 5 gallon buckets. Don't store them inside.

lenmissy 03-15-2017 01:18 PM

Re: gas filter
 

6 inches from gas tank.


All times are GMT -5. The time now is 10:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.