![]() |
6 blade plastic fan Would the 6 blade plastic fan be more balanced than the 2 blade aluminum stock fan? Is the only benefit more cooling?
|
Re: 6 blade plastic fan The majority of our guys run them, NEVER saw one break!
Bill W. |
Re: 6 blade plastic fan The plastic fan also weighs a lot less than does the aluminum fan.
|
Re: 6 blade plastic fan I have had good luck with mine.
John |
Re: 6 blade plastic fan They do a great job but they look so Mickey Mouse ! Does not seem to go along with the rest of Henry's creation ! Wayne
|
Re: 6 blade plastic fan C26Pinelake X 2.
|
Re: 6 blade plastic fan Use PLASTIC fans for safety, did you ever try to put your elbow against the back side of a METAL fan? PLASTIC fan jist goes, "BRRRRP!! YES, I'VE DONE IT!!
Bill W. |
Re: 6 blade plastic fan Quote:
... |
Re: 6 blade plastic fan Quote:
And that includes elbows and pencils.:eek: |
Re: 6 blade plastic fan Joop posted this back 4 years ago;
Found this on the internet. Air through the radiator is the important consideration. That is where the heat transfer occurs. Meauring the air flow into the radiator that results from the turning fan is the test to run. That was done and reported in the Spring issue of the Model A Times. Page 7 contains a chart tht shows the results of three fans, the 2 blade, the 4 blade, and the 6 blade. In front of the radiator the air speed (mph) created by the fan was measured as: blades-----2---------4--------6 500rpm---4.8--------4.5-----3.0 mph 1000rpm--9.0--------9.6-----8.5 mph 1500rpm--14--------14------13.5 mph |
Re: 6 blade plastic fan After my 4-blade "truck" fan took out my radiator when the rivets let loose, I opted for the plastic fan. Even if it does come loose (witch I doubt it will) the damage it would do to the radiator and/or other sheet metal couldn't help but be considerably less. I also realize that air flow on all 3 fans is essentially the same, so that is not a consideration. Anything past 25 mph, a fan is not needed anyway.
|
Re: 6 blade plastic fan What would our world be like without PLASTIC?
Bill W. |
Re: 6 blade plastic fan Quote:
|
Re: 6 blade plastic fan Quote:
|
Re: 6 blade plastic fan Quote:
If you cleaning the roadside, DON'T touch them corked up gallon jugs of some UNKNOWN YELLOW LIQUID, them dudes will BLOW UP, from sittin' in the HOT SUN!!!!!!:eek::eek::eek::eek::eek::eek: The fumes would probably power a Model A! Bill W. |
Re: 6 blade plastic fan 1 Attachment(s)
Quote:
|
All times are GMT -5. The time now is 05:19 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.