The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   resitor (https://www.fordbarn.com/forum/showthread.php?t=158296)

FlatheadTed 01-02-2015 01:23 PM

resitor
 

1 Attachment(s)
I enjoyed the benefit of Henrys 4,1/2 volt Ballast resister this week ,I left the ING on for three hours and the coil only got a little warm ,Started right up , the condenser here is on the Generator .away from the distributor. Ted

tubman 01-02-2015 02:55 PM

Re: resitor
 

Points left in open position? My old Irish boss used to say "It's better to be lucky than smart!".

FlatheadTed 01-02-2015 03:16 PM

Re: resitor
 

I could be wrong ,But the coil was warm ,What happens under these circumstances the ballast heats up increasing resistance and reducing voltage to the coil and points .Part of Henrys coil protection .Ted

supereal 01-03-2015 12:17 AM

Re: resitor
 

The condenser on a generator is likely for radio noise suppression, not ignition.

FlatheadTed 01-03-2015 02:36 AM

Re: resitor
 

yes I understand that's normally the case ,but here we have the wire going to the points side of the coil .Ted


All times are GMT -5. The time now is 05:40 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.