|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-09-2012, 07:23 AM | #1 |
Senior Member
Join Date: May 2010
Location: Arp, Texas
Posts: 123
|
32 style dash in a 31 model A
Plan to put a 32 style dash in my 31. There are two different ways you can do this and two differen after market dashes you can buy. One is a partial 32 dash that slips behind the 31 dash rail and bolts behind the 31 rail. The other is a complete 32 style dash that bolts in the 31 holes. Has any one done this and which is the best approach. Thanks, Jim
|
07-09-2012, 12:00 PM | #2 |
Member
Join Date: Jan 2012
Location: Camden, maine
Posts: 67
|
Re: 32 style dash in a 31 model A
I used the Brookville unit, nicely made, screws in using all the original screws
|
Sponsored Links (Register now to hide all advertisements) |
|
07-10-2012, 08:52 AM | #3 |
Senior Member
Join Date: May 2010
Location: Lewisburg,PA
Posts: 938
|
Re: 32 style dash in a 31 model A
OOh, hot rod! I have no problem with that, but you'd probably get more and more complete answers over on the HAMB.
|
07-11-2012, 09:40 PM | #4 |
Senior Member
Join Date: May 2010
Location: Arp, Texas
Posts: 123
|
Re: 32 style dash in a 31 model A
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|