|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-21-2013, 01:03 PM | #1 |
Junior Member
Join Date: Jul 2012
Location: Westchester County NY
Posts: 26
|
Tubular rivet tool needed
Can someone tell me where I can buy a tubular rivet tool? I need to replace the rivets that hold the hood leather corners on.
|
05-21-2013, 01:05 PM | #2 |
Senior Member
Join Date: May 2010
Location: Toronto, Ontario, Canada
Posts: 1,289
|
Re: Tubular rivet tool needed
Try a leather store such as Tandy's, or any motorcycle leather shop....
|
Sponsored Links (Register now to hide all advertisements) |
|
05-21-2013, 01:12 PM | #3 |
Senior Member
Join Date: May 2010
Location: Rhode Island
Posts: 1,868
|
Re: Tubular rivet tool needed
These people have all the rivet stuff for the Model A's and T's
http://www.bigflatsrivet.com/index.html |
05-21-2013, 01:12 PM | #4 |
Senior Member
Join Date: Apr 2012
Posts: 1,542
|
Re: Tubular rivet tool needed
|
05-21-2013, 01:27 PM | #5 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Tubular rivet tool needed
I'm pretty sure I used the brake rivet tool I bought from Bratton's many years ago.
Putting a drop of oil on the handheld rivet tool helps it make a neat rolled lip. |
05-21-2013, 01:31 PM | #6 |
Senior Member
Join Date: May 2010
Location: Jackson Michigan
Posts: 245
|
Re: Tubular rivet tool needed
Sponsored Links (Register now to hide all advertisements)
|
05-21-2013, 01:49 PM | #7 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,545
|
Re: Tubular rivet tool needed
There are two good ones available IMO. I happen to own both but the one we are most partial to is to one that is made from a clamp and used in the Tonka Toy truck restoration, --or one used in riveting linings onto Model-T Ford transmission bands. Both of these are available on eBay all the time. Below are a couple of pictures showing what to look for.
When you have one that requires the use of a hammer, then you need a minimum of 3 hands and you run a huge risk of a misplaced blow. . |
05-21-2013, 08:53 PM | #8 |
Senior Member
Join Date: May 2010
Location: South East NJ
Posts: 3,398
|
Re: Tubular rivet tool needed
What I found worked great was my floor mounted kick riveter used to set brake shoe rivets.
One person holds the part the other does the fine line up and kick. So if you know of someone that will give you the 10 minutes on their machine you need ask. I am too far south unless you are planing a trip to Atlantic City, NJ then you just need to go 8 minutes out of your way. |
05-22-2013, 07:37 AM | #9 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,393
|
Re: Tubular rivet tool needed
I used little tiny machine screws from loew's, nuts, lockwashers, cut the screws real short, little dab of black paint on the screw head, looks like it's rivited. FWIW
Paul in CT |
|
|
Sponsored Links (Register now to hide all advertisements) |
|