09-23-2013, 11:08 AM | #161 |
Member
Join Date: Aug 2013
Location: Houston Area
Posts: 69
|
Re: Model A Huckster Group
Nasty (Is that REALLY your name? What mother would name their baby "Nasty"??? )
I'm not aware of any Hucksters that were built on a truck (AA) chassis but it would be naïve for me to say that it never happened. I imagine that some custom bodies invariably ended up on the heavier chassis but the intent of the "Huckster" design (i.e. farmer's market sales and similar uses) rarely required the heavy duty (but slow) haul-ability of the AA chassis. You might be getting an example of someone's thinking outside the box, so to speak. Got any pictures??? Harvey
__________________
1930 Huckster Van (in progress) WW2 Ford A-powered Aircraft Tug 1942 Boeing N2S-3 ("Stearman") 1942 HD45 WLA 1970 BSA 650 Lightning |
09-23-2013, 08:37 PM | #162 |
Senior Member
Join Date: May 2010
Location: Stayton, Oregon
Posts: 3,806
|
Re: Model A Huckster Group
Be sure you also have good shocks on your huckster. The bodies tend to be heaver than most Model A's so you need good shocks to have a smooth riding rig.
__________________
Fred Kroon 1929 Std Coupe 1929 Huckster |
Sponsored Links (Register now to hide all advertisements) |
|
09-24-2013, 06:25 AM | #163 |
Member
Join Date: Aug 2013
Location: Houston Area
Posts: 69
|
Re: Model A Huckster Group
Fred,
Good point! Are overhauled original shocks able to carry the additional weight or are modern tubular ones necessary? Does anything have to be done to the rear spring or shocks to correct any back end sag due to the heavier body? Harvey
__________________
1930 Huckster Van (in progress) WW2 Ford A-powered Aircraft Tug 1942 Boeing N2S-3 ("Stearman") 1942 HD45 WLA 1970 BSA 650 Lightning |
09-24-2013, 11:21 AM | #164 |
Senior Member
Join Date: May 2010
Location: Stayton, Oregon
Posts: 3,806
|
Re: Model A Huckster Group
I installed an aftermarket type of shocks on my rig. But they seem to not be doing a very good job. It could be the brand I used or I have not adjusted them correctly.
But I am thinking on maybe looking into modern tubular shocks. Being a huckster is not a "true" Ford model, I would think a few extra modern items would not affect it's value and may enhance it. Anyway Harvey, that is my experience over the last three years or so since I finished my huckster.
__________________
Fred Kroon 1929 Std Coupe 1929 Huckster |
09-24-2013, 01:09 PM | #165 |
Senior Member
Join Date: May 2010
Location: Torrington, CT
Posts: 609
|
Re: Model A Huckster Group
The pick up body that I found has metal doors skins and a little
window behind the door. Would it be a Huckster? |
09-24-2013, 01:19 PM | #166 | |
Member
Join Date: Aug 2013
Location: Houston Area
Posts: 69
|
Re: Model A Huckster Group
Sponsored Links (Register now to hide all advertisements)
Quote:
Harvey
__________________
1930 Huckster Van (in progress) WW2 Ford A-powered Aircraft Tug 1942 Boeing N2S-3 ("Stearman") 1942 HD45 WLA 1970 BSA 650 Lightning |
|
01-09-2014, 11:50 AM | #167 |
Junior Member
Join Date: Jan 2014
Location: Southern Indiana
Posts: 9
|
Re: Model A Huckster Group
Hello All, First post on FordBarn but have been a member of the H.A.M.B. for quite a little while (same username).
I somehow managed to get the same Huckster that 358ciHD had posted about on page 4 of this thread. Although he was probably 2 or three owners ago, the truck cab/doghouse obviously isn't a 30 but the entire running gear/chassis is 30 and appears to be in good working order. Just waiting on warmer weather to get out to the garage to tinker a little bit. I plan on getting everything up to snuff for highway safety and will be replacing some of the wood pieces that have cracked but will be keeping the wood painted with a white coat of paint. I've been trying to get my hands on a Model A for quite some time to use for shop runs and putting around town. I'm not looking to completely restore this truck but have a fun little toy to get me where I need to go, if all goes well with running gear and whatnot a Mitchell Overdrive will be installed in the spring to achieve safe road speeds without fear of getting a semi-truck up my butt. . Also I plan on making a "rustic" looking roof rack to go over the vinyl top so I can haul the steel that I use to build motorcycle frames, handlebars, etc... One question I have for you gentlemen is what do you use for the vinyl strip that covers the edge of the vinyl top to hide the screws/nails/tacks? I've enjoyed the thread so far and look forward to future posts and learning from you guys.
__________________
Mike Warstler (AKA Sailor Mike) "Mighty-Mikes Welding, Fabrication and Customs" 1930 Ford Model A Huckster |
01-10-2014, 02:22 AM | #168 | |
Senior Member
Join Date: May 2010
Location: Crown Point, NY and Punta Gorda, FL.
Posts: 259
|
Re: Model A Huckster Group
Welcome Sailor Mike, to this side.
Quote:
|
|
01-10-2014, 02:31 AM | #169 | |
Senior Member
|
Re: Model A Huckster Group
Quote:
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
|
01-10-2014, 08:45 AM | #170 |
Junior Member
Join Date: Jan 2014
Location: Southern Indiana
Posts: 9
|
Re: Model A Huckster Group
Thanks JazzJR.
I was curious if Hidem Welt was what most of you guys used. Now I just need to get a large roll of vinyl top but have a little ways to go before I get to that point. Will keep you all posted on my progress. Mike
__________________
Mike Warstler (AKA Sailor Mike) "Mighty-Mikes Welding, Fabrication and Customs" 1930 Ford Model A Huckster |
01-10-2014, 09:06 PM | #171 | |
Senior Member
Join Date: May 2010
Location: Crown Point, NY and Punta Gorda, FL.
Posts: 259
|
Re: Model A Huckster Group
Quote:
I'm not sticking up for Macs, ( they charge Me NY & FL state tax, and have High Shipping Costs, and slow shipping) but in this case, the Welting is .45 cents a Foot. The other 4 suppliers I checked sell for .80 & 1.00 a ft, and 2 or them I could not find a Listing for the Welt. Last edited by Jazzjr; 01-10-2014 at 09:11 PM. |
|
01-11-2014, 12:47 AM | #172 | |
Senior Member
|
Re: Model A Huckster Group
Quote:
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
|
01-13-2014, 07:49 AM | #173 |
Junior Member
Join Date: Jan 2014
Location: Southern Indiana
Posts: 9
|
Re: Model A Huckster Group
Thanks for the info, I'll have to check out Mikes. But I'll be doing the top more around springtime anyway.
Anyway, the truck is up and running this weekend! Just had to get a rebuilt starter (since the coil field was grounded out) and clean out the fuel lines and it was running smooth again!
__________________
Mike Warstler (AKA Sailor Mike) "Mighty-Mikes Welding, Fabrication and Customs" 1930 Ford Model A Huckster |
01-27-2014, 09:42 PM | #174 |
Member
Join Date: Aug 2013
Location: Houston Area
Posts: 69
|
Re: Model A Huckster Group
Guys,
Several you have suggested purchasing Jay's instructional DVD if building a Huckster from the Wagon Works plans. I purchased Jay's video cassette when I bought my "Huckster Van" plans from him and did not know that a DVD was available (and possibly wasn't at the time). DVDs are sooooo much easier to use than video tape so I'm considering ordering one. However, can someone tell me if the DVD is a newer presentation, or is it identical to the video tape? I don't want to spend money on a DVD if it's no different than the tape. Thanks, Harvey
__________________
1930 Huckster Van (in progress) WW2 Ford A-powered Aircraft Tug 1942 Boeing N2S-3 ("Stearman") 1942 HD45 WLA 1970 BSA 650 Lightning |
02-05-2014, 05:02 AM | #175 |
Member
Join Date: Aug 2013
Location: Houston Area
Posts: 69
|
Re: Model A Huckster Group
I called Wagon Works and talked to Jay's wife (Jay was still at work). She told me that the material on the VHS tape and DVD are the same. The DVD, while newer, doesn't include any updates or corrections that the VHS tape doesn't have.
Harvey
__________________
1930 Huckster Van (in progress) WW2 Ford A-powered Aircraft Tug 1942 Boeing N2S-3 ("Stearman") 1942 HD45 WLA 1970 BSA 650 Lightning |
02-05-2014, 09:34 AM | #176 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
Re: Model A Huckster Group
Are there AA Hucksters?
I am sure there were...maybe? Pluck |
02-05-2014, 09:49 AM | #177 | |
Member
Join Date: Aug 2013
Location: Houston Area
Posts: 69
|
Re: Model A Huckster Group
Pluck,
From a post in this thread last September... Quote:
__________________
1930 Huckster Van (in progress) WW2 Ford A-powered Aircraft Tug 1942 Boeing N2S-3 ("Stearman") 1942 HD45 WLA 1970 BSA 650 Lightning |
|
02-10-2014, 10:32 PM | #178 |
Junior Member
Join Date: Feb 2012
Location: Ohio
Posts: 13
|
Re: Model A Huckster Group
Any advice on painting the wood portion of a huckster? I want to paint it same color as hood, not sure what kind of prep the wood will need other then primer, I used maple so no filling is necessary.
|
02-10-2014, 11:15 PM | #179 | |
Senior Member
Join Date: Jul 2010
Location: Cow Hampshire
Posts: 4,188
|
Re: Model A Huckster Group
Quote:
Certainly this a "custom cab." Why do honky-tonk pianos ALWAYs have the front panel removed? Joe K
__________________
Shudda kept the horse. |
|
03-19-2014, 09:08 PM | #180 |
Junior Member
Join Date: Dec 2012
Posts: 5
|
Re: Model A Huckster Group
I made a 1930 Model A version of the 1950 Mechanix Illustrated pickup/station wagon. I made the cab visor to match the Wagon Works Huckster Van I made. This was at the Beardsley Cider Mill last year. That is a great show! How do I attach a picture of it here?
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|