50/50 mixture of Acetone and ATF

[scicala]

I have a question...., when using a 50/50 mixture of acetone and ATF as a penetrating oil to loosen stuck parts, can the acetone/ATF mixture be stored in a plastic container, or does it have to be a metal or glass container ?? I never used it before, and not sure if it will attack the plastic.

Anybody know for sure ?

Thanks, Sal

[Mart]

I have had some in one of those plastic flip top squirty drinks bottles runners use. Your results may vary, test with a small quantity first.

Mart.

[FortyNiner]

I've used it from a plastic pump container without issue.

[scicala]

Thanks for the quick replies Mart and FortyNiner.

Sal

[my4dv8]

Perhaps try a small thumb pump type oil can.

[Walt Dupont--Me.]

Sponsored Links (Register now to hide all advertisements)

I put a quart of each in a gal paint thinner can, shake it up, then fill a metal squirt can. You have to shake each time you use, it separates. Walt

[Tim Ayers]

I've used it in both metal and plastic containers without issue. As Walt stated, shake before use. It does work well.

[G.M.]

I had a 5 gallon metal can of acetone that destroyed the plastic pour spout
on the top of the can from fumes I guess. G.M.

[hotrodA]

Mixed it in a plastic coffee container, and used a plastic ketchup bottle to squirt into cylinders.

That stuff WORKS!!

[GB SISSON]

Originally Posted by Mart

I have had some in one of those plastic flip top squirty drinks bottles runners use. Your results may vary, test with a small quantity first.

Mart.

Nobody has ever accused me of being a 'safety nut', but I'm thinking that to my grandkids that could look a lot like a strawberry-kiwi juice drink. This debate brings up the guy who invented the 'universal solvent'. Unfortunately there was nothing he could keep it in..... And lastly, I have had that mix in a 59ab for 3 months and this afternoon I pulled the timing gear cover and cam gear and plan to haul the engine into my shop and see if it will turn. I have had good luck with it and also mmo and acetone.

[scicala]

Thanks to everyone for all of the good input.

Sal

[BrianCT]

My experience was that the bottle i chose was attacked. Acetone will dissolve some plastics.

[Mart]

Good point about safety. No youngsters in my garage, though, so didn't cross my mind.

Mart.

[itslow]

Originally Posted by hotrodA

...used a plastic ketchup bottle to squirt into cylinders.

Likewise, I have a mix in one of the condiment squirt bottles that are sold by Wal-Mart or the like. The acetone not dissolved the plastic.

[jake197000]

i had a 4 hp staionary engine with a long time stuck piston i stood it on end fillred yhe cylinder with acetone and put a stick for a wick in it put a couplr propanr torches on it for about 8 hours a nd with a 2 x 4 knocked it out without too much effort had to sleeve it but its been running good for 25 years.it does work

[Ol' Ron]

A blast from the past. Sure miss Walt.
Gramps

[Ray in La Mesa]

Glass is best but the acetone tends to evaporate over time so more must be added for each use.

[Vics Stuff]

I have always stored my mix in a plastic oil container. I have never had issues with the plastic melting. I keep the cap sealed as to no acetone evaporates. The concoction works great.
Vic