|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-13-2024, 05:25 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 903
|
valve parts application
I am trying to use sealed power v1558 valves in my A engine but I only have 5 on hand, I tried to use the sealed power number to buy some more but the warehouses and parts places want an engine vehicle application , they can't or won't cross the numbers over to their brand of parts, The guide application is for a 61-63 olds or pontiac 315 cu. in . engine . I cant find what engine manufacture /application the valves are supposed to fit, luckily I have plenty of valve guides on hand and 5 of the v-1558 valves already or I would just buy the kits available from the model A suppliers. appreciate you help . Fordestes .
|
05-13-2024, 08:58 PM | #2 |
Senior Member
Join Date: May 2010
Location: albany
Posts: 468
|
Re: valve parts application
I come up with gmc 305 v6 for that valve. Supersedes to s2326. Its not available thru SBI. Maybe try egge or ebay
|
Sponsored Links (Register now to hide all advertisements) |
|
05-13-2024, 09:33 PM | #3 | |
Senior Member
Join Date: May 2010
Posts: 903
|
Re: valve parts application
Quote:
Thanks again. Fordestes |
|
05-13-2024, 10:18 PM | #4 |
Senior Member
Join Date: May 2010
Location: Santa Rosa, CA
Posts: 1,282
|
Re: valve parts application
Not sure what you are looking for, but call Manley with the dimensions you want, size, length, diameter, etc and they will build it for you and the price is not bad. Google their catalogue and you may find a stock valve that is just right for your application.
|
05-14-2024, 07:03 AM | #5 |
Senior Member
Join Date: Nov 2010
Location: Beamsville,Ontario,Canada
Posts: 495
|
Re: valve parts application
I was in the same situation earlier this year, it seems that SP V1558 is no longer made. I found some on eBay under the GM part number.
|
05-14-2024, 07:18 AM | #6 |
Senior Member
Join Date: Jun 2010
Location: 34.22 N 118.36 W
Posts: 1,068
|
Re: valve parts application
Sponsored Links (Register now to hide all advertisements)
They make customs or obsolete John
__________________
As Carroll Smith wrote; All Failures are Human in Origin. |
05-14-2024, 12:52 PM | #7 |
Senior Member
Join Date: May 2010
Posts: 903
|
Re: valve parts application
can you give me the G.M. Part number, mabe I will get lucky, I have 5 on hand and the guides on hand, I am 3 valves short, I I didn't already have the guides ,retainers and keepers I would opt for one of the retro modern valve kits offered, the G.M Valves have an abundance of material on the face and should last for another century.
|
05-14-2024, 03:26 PM | #8 |
Senior Member
Join Date: Aug 2010
Location: SF Bay Area
Posts: 212
|
Re: valve parts application
|
05-14-2024, 08:36 PM | #9 |
Senior Member
Join Date: Nov 2010
Location: Beamsville,Ontario,Canada
Posts: 495
|
Re: valve parts application
The GM part number:2368099.
I was using NOS Model B lifters with my Burtz cam in my Burtz block. The new valves from major model A suppliers were way too short, the V1558 valves where long enough to be shortened to the correct gap. |
05-14-2024, 09:31 PM | #10 |
Senior Member
Join Date: Nov 2010
Location: Beamsville,Ontario,Canada
Posts: 495
|
Re: valve parts application
Oldsmobile obsolete has one listed.
|
05-15-2024, 06:44 AM | #11 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,555
|
Re: valve parts application
Quote:
|
|
05-15-2024, 11:02 AM | #12 |
Senior Member
Join Date: Aug 2010
Location: SF Bay Area
Posts: 212
|
Re: valve parts application
Eh- hopefully just a really out of focus picture!!! kinda looks like there might be a keeper groove at the end.
|
05-15-2024, 04:22 PM | #13 |
Senior Member
Join Date: May 2010
Posts: 903
|
Re: valve parts application
|
05-15-2024, 04:25 PM | #14 | |
Senior Member
Join Date: May 2010
Posts: 903
|
Re: valve parts application
Quote:
|
|
05-15-2024, 04:29 PM | #15 |
Senior Member
Join Date: May 2010
Posts: 903
|
Re: valve parts application
that is what I am finding out, I found enough to finish this engine from one of my old sources in Louisiana at $10.00 each , now to find the rest for another engine I have underway , I will need 4 more valves to complete it, thanks for all your help .
|
05-16-2024, 01:09 AM | #16 |
Senior Member
Join Date: Aug 2010
Location: SF Bay Area
Posts: 212
|
Re: valve parts application
Just be aware those were never inexpensive valves. I have some and they were about $15.00 each at least 10 years ago.
|
05-18-2024, 04:39 PM | #17 |
Senior Member
Join Date: May 2010
Posts: 903
|
Re: valve parts application
I want to thank Mr. Bruce for helping me out on my search for the valve train parts, and also I learned a lot of useful information about these cars from him, is .002 interference fit right for the guides press fit in the block, I don't want to trash a good block by forcing the guides into the bores and causing a crack. Thanks Fordbarn !
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|