|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-16-2015, 02:47 PM | #1 |
Senior Member
Join Date: May 2010
Location: Rocky Mount,MO.
Posts: 410
|
what plugs needed
called local auto parts for spark plugs they have champion H 10 C said most used that is that a good choice
|
05-16-2015, 02:51 PM | #2 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,796
|
Re: what plugs needed
That's a 14MM plug, what head are you running?
Bob |
Sponsored Links (Register now to hide all advertisements) |
|
05-16-2015, 03:51 PM | #3 |
Senior Member
Join Date: May 2010
Location: Rocky Mount,MO.
Posts: 410
|
Re: what plugs needed
that wont work then that h 10 c is what the counter guy came up with,
|
05-16-2015, 04:32 PM | #4 |
Senior Member
Join Date: May 2010
Location: Cape Cod
Posts: 1,128
|
Re: what plugs needed
I would call a auto parts store that specializes in Model A parts.
Try Berts in Denver Colorado. Marc |
05-16-2015, 05:10 PM | #5 |
Senior Member
Join Date: May 2010
Location: Pace, FL near Pensacola
Posts: 374
|
Re: what plugs needed
Here's a previous thread with spark plug info: https://www.fordbarn.com/forum/showthread.php?t=6458
|
05-16-2015, 05:31 PM | #6 |
Senior Member
Join Date: May 2010
Location: Asheville,NC
Posts: 3,104
|
Re: what plugs needed
Sponsored Links (Register now to hide all advertisements)
__________________
http://www.model-a-ford-4bangers.com/ |
05-16-2015, 05:35 PM | #7 |
Senior Member
Join Date: May 2010
Location: Young Harris, GA
Posts: 1,835
|
Re: what plugs needed
I just looked this up the other day.
If you want to order some of these plugs at an auto parts store (I use O'Reilley's because that's what's here) you need to give them a different Champion number. To get the Champion W16Y plug that many feel are good middle of the road plugs, you need to order Champion 561. O'Reilley's can get you the original Champion 3X for $20 each. It is known as the Champion 429. If you want a Champion W18, you order a Champion 518. Hope this helps.
__________________
Jim Cannon Former MAFCA Technical Director "Have a Model A day!" |
05-16-2015, 06:18 PM | #8 |
Senior Member
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
|
Re: what plugs needed
|
05-16-2015, 06:23 PM | #9 |
Senior Member
Join Date: Dec 2012
Location: coquitlam b.c. canada
Posts: 130
|
Re: what plugs needed
I use auto lite 3076 because they're inexpensive and work well, cost around 3.00 each.
|
05-16-2015, 10:21 PM | #10 |
Senior Member
Join Date: May 2010
Location: Rocky Mount,MO.
Posts: 410
|
Re: what plugs needed
thanks
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|