The Ford Barn

FrankWest · 08-02-2019, 05:57 PM

Is there a floor seal between the transmission cover and the floor on a 1933 model B metal floor?

Angledrive · 08-02-2019, 07:02 PM

Yes, seal and tower boot. Early Ford Store, San Dimas, California has them

FrankWest · 08-02-2019, 07:08 PM

I had to remove the forward floor section to get at the clutch linkage, is the a gasket/seal between that and the metal floor to prevent rattleing?

DavidG · 08-02-2019, 07:13 PM

No gasket or seal originally on '33-'34s, nor a boot over the shift lever housing.

Angledrive · 08-02-2019, 07:23 PM

I guess mine came with the aftermarket stuff, did not know it was not OEM. David, when did Ford start using the seal, or did they ever?

DavidG · 08-02-2019, 11:09 PM

Sponsored Links (Register now to hide all advertisements)

The transmission cover plate to floor seal first appeared in the 1937 model year.

FrankWest · 08-03-2019, 06:28 AM

Thanks....I guess the heavy rubber floor mat helped control noise

08-02-2019, 05:57 PM	#1
FrankWest Senior Member Join Date: Sep 2013 Posts: 3,005	transmission floor cover gasket/seal Is there a floor seal between the transmission cover and the floor on a 1933 model B metal floor?

08-02-2019, 07:02 PM	#2
Angledrive Senior Member Join Date: May 2010 Location: Lakeland Florida Posts: 303	Re: transmission floor cover gasket/seal Yes, seal and tower boot. Early Ford Store, San Dimas, California has them

08-02-2019, 07:08 PM	#3
FrankWest Senior Member Join Date: Sep 2013 Posts: 3,005	Re: transmission floor cover gasket/seal I had to remove the forward floor section to get at the clutch linkage, is the a gasket/seal between that and the metal floor to prevent rattleing?

08-02-2019, 07:13 PM	#4
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,094	Re: transmission floor cover gasket/seal No gasket or seal originally on '33-'34s, nor a boot over the shift lever housing.

08-02-2019, 07:23 PM	#5
Angledrive Senior Member Join Date: May 2010 Location: Lakeland Florida Posts: 303	Re: transmission floor cover gasket/seal I guess mine came with the aftermarket stuff, did not know it was not OEM. David, when did Ford start using the seal, or did they ever?

08-02-2019, 11:09 PM	#6
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,094	Re: transmission floor cover gasket/seal Sponsored Links (Register now to hide all advertisements) The transmission cover plate to floor seal first appeared in the 1937 model year.

08-03-2019, 06:28 AM	#7
FrankWest Senior Member Join Date: Sep 2013 Posts: 3,005	Re: transmission floor cover gasket/seal Thanks....I guess the heavy rubber floor mat helped control noise