The Ford Barn

edhd58 · 10-14-2021, 06:05 PM

Sponsored Links (Register now to hide all advertisements)

posting for Jerrard Tonno on the Flatspot website ... he says he couldnt post here

If anyone knows where I might be able to locate a set of standard bore (2 7/8" - 2.875") piston rings for steel pistons in my Zephyr HV-12. (late '46-48 engine), I would be very appreciative. Egge - no, Boos & Herrel - no, Earle O. Brown - doesn't return messages, Al Whelihan - spoke to him a few weeks ago after several attempts to reach him and he said he would check and let me know - I never heard back. Tried both Hastings and Grant - might as well talk to the wall.
I don't want to needlessly over bore a good block as that makes absolutely no sense. Please let me know if you can help.
Thanks.

10-14-2021, 06:05 PM	#1
edhd58 Senior Member Join Date: Jul 2014 Location: Guston,ky Posts: 653	Zephyr HV-12. rings City: Leesburg State: Fla Sponsored Links (Register now to hide all advertisements) posting for Jerrard Tonno on the Flatspot website ... he says he couldnt post here If anyone knows where I might be able to locate a set of standard bore (2 7/8" - 2.875") piston rings for steel pistons in my Zephyr HV-12. (late '46-48 engine), I would be very appreciative. Egge - no, Boos & Herrel - no, Earle O. Brown - doesn't return messages, Al Whelihan - spoke to him a few weeks ago after several attempts to reach him and he said he would check and let me know - I never heard back. Tried both Hastings and Grant - might as well talk to the wall. I don't want to needlessly over bore a good block as that makes absolutely no sense. Please let me know if you can help. Thanks.