|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-20-2016, 08:37 AM | #1 |
Senior Member
Join Date: May 2010
Location: East Tennessee
Posts: 102
|
Sending unit rebuild
Does anyone rebuild or repair the King Seely fuel sending unit? I have 2 that don't work (just bought one that was supposed to work properly and doesn't). I've done all the tests and the issue is the sending unit. I also have some gauges to repair. Not interested in trying to make the repops work.
|
11-20-2016, 09:04 AM | #2 | |
Senior Member
Join Date: Apr 2013
Location: Virginia Beach, VA
Posts: 345
|
Re: Sending unit rebuild
Quote:
I used Bob's Speedometer. The web site is, bobsspeedometer.com Sent from my iPad using Tapatalk |
|
Sponsored Links (Register now to hide all advertisements) |
|
11-20-2016, 10:09 AM | #3 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,420
|
Re: Sending unit rebuild
You might pop the cap off the sending unit and check the condition of the bi-metallic strip, the little set of points, plus the internal wiring & calibration coil. If the strip or points are damaged, you may have to keep looking for a better part. Sometimes the little points just need to be cleaned but you have to be careful with them. They are very small and delicate. It's a wonder that they last as well as they do. There are many of them out there that still function normally after so many years. King Seeley made a good product.
|
11-20-2016, 12:49 PM | #4 | |
Senior Member
Join Date: May 2010
Location: Schooley's Mountain
Posts: 530
|
Re: Sending unit rebuild
Quote:
Baxter Ford Parts Auto Parts Store · Pinckney Address: 131 Arkansas St, Lawrence, KS 66044 Phone: (785) 842-9256 |
|
11-21-2016, 07:56 AM | #5 |
Senior Member
Join Date: Apr 2011
Location: Northern New Jersey
Posts: 370
|
Re: Sending unit rebuild
Sponsored Links (Register now to hide all advertisements)
http://www.classicandexotic.com/stor...uel-gauge.aspx http://www.classicandexotic.com/stor...g-service.aspx
__________________
Assumption is the mother of all foul-ups. Last edited by stangblue; 11-21-2016 at 08:04 AM. Reason: added link |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|