Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 04-16-2019, 03:14 AM   #1
Flat32
Member
 
Join Date: May 2010
Location: Federal Way, WA
Posts: 94
Default cylinder bore spacing

I've spent hours searching for cylinder bore spacing and find nothing.

I know the spacing for the Flathead v8, but not the Lincoln Zeyphr and the V8 60.

I'm needing these dimensions to make my computer models of these engines.
I know Ford used fractional dimensions for bore spacing so simple ruler measuring of head gaskets would be OK.

Anybody have this info or gaskets readily available??

Thanks,
Ray
Flat32 is offline   Reply With Quote
Old 04-16-2019, 08:36 AM   #2
Elmo Rodge
Senior Member
 
Elmo Rodge's Avatar
 
Join Date: May 2010
Location: Salina, Utah
Posts: 219
Default Re: cylinder bore spacing

Ray, starting at center of one end, 3 3/16, 7 13/16, 11. That's for a "60".
Wayno
__________________
Life is not a spectator sport.
Elmo Rodge is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 04-16-2019, 02:34 PM   #3
Flat32
Member
 
Join Date: May 2010
Location: Federal Way, WA
Posts: 94
Default Re: cylinder bore spacing

Great. Thanks Wayno.
I pulled the trigger and ordered a complete Zephyr gasket set so I'm covered for the V12.
Flat32 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:28 AM.