The Ford Barn

Cape Codder · 03-03-2018, 10:00 PM

Did the '30 DeLuxe Fordor with the wooden body rail have 1/8" rubber shims at each mounting point and from there increase a rubber shim for alignment of the doors? Or did the wooden body rail go directly on the frame without the rubber and then increase for alignment?

1930artdeco · 03-03-2018, 10:32 PM

My Briggs sedan goes rubber pads then wood sills.

Mike

BRENT in 10-uh-C · 03-04-2018, 04:56 PM

Sponsored Links (Register now to hide all advertisements)

Originally, no rubber needed.

03-03-2018, 10:00 PM	#1
Cape Codder Senior Member Join Date: May 2010 Posts: 1,261	'30 DeLuxe Blindback Wood Installation Did the '30 DeLuxe Fordor with the wooden body rail have 1/8" rubber shims at each mounting point and from there increase a rubber shim for alignment of the doors? Or did the wooden body rail go directly on the frame without the rubber and then increase for alignment?

03-03-2018, 10:32 PM	#2
1930artdeco Senior Member Join Date: May 2010 Location: Lynden, Wa Posts: 3,550	Re: '30 DeLuxe Blindback Wood Installation My Briggs sedan goes rubber pads then wood sills. Mike __________________ 1930 TownSedan (Briggs) 1957 Country Sedan

03-04-2018, 04:56 PM	#3
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,507	Re: '30 DeLuxe Blindback Wood Installation Sponsored Links (Register now to hide all advertisements) Originally, no rubber needed. __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode