|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-21-2018, 03:44 PM | #1 |
Senior Member
Join Date: Jul 2011
Location: Deerfield N.H.
Posts: 294
|
Brake drum help 36-39
I have 2 sets of rear Brake drums , were the bearing rests on one set is a flat, round pc of metal. On the other set the bearing is just setting on the inside , no metal ring. The 2 sets are different. Any info would be of great help. Thanks Ray
|
08-21-2018, 05:10 PM | #2 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,711
|
Re: Brake drum help 36-39
Is it the seal snap ring??
Bob |
Sponsored Links (Register now to hide all advertisements) |
|
08-21-2018, 05:13 PM | #3 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,732
|
Re: Brake drum help 36-39
Hard to say for sure, but is one missing the seal?
Pics would help. Big time. |
08-21-2018, 05:37 PM | #4 |
Senior Member
Join Date: Jul 2011
Location: Deerfield N.H.
Posts: 294
|
Re: Brake drum help 36-39
It is inside the drum were the bearing rests. Ray
|
08-21-2018, 08:02 PM | #5 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,140
|
Re: Brake drum help 36-39
the march 1936 service bulletin shows one hub the bearing --large style like model A rids direct on the hub, the later one has a hardened sleeve a smaller roller bearing rides on
|
08-21-2018, 08:18 PM | #6 |
Senior Member
Join Date: May 2010
Location: charlottesville, Va.
Posts: 588
|
Re: Brake drum help 36-39
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|