Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 02-01-2021, 02:55 PM   #1
hombres ruin
Senior Member
 
hombres ruin's Avatar
 
Join Date: May 2010
Location: san diego
Posts: 517
Default Napa part number for 41 fan belt

Can anyone tell me what the Napa part number is for a fan belt for a 41 ford coupe? Stock pulleys,6 V 42 generator. I have one from C&G it’s V shaped with ridges.
__________________
"I have built my organisation on fear"..Al Capone.
hombres ruin is offline   Reply With Quote
Old 02-01-2021, 03:13 PM   #2
51 MERC-CT
Senior Member
 
51 MERC-CT's Avatar
 
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
Default Re: Napa part number for 41 fan belt

Quote:
Originally Posted by hombres ruin View Post
Can anyone tell me what the Napa part number is for a fan belt for a 41 ford coupe? Stock pulleys,6 V 42 generator. I have one from C&G it’s V shaped with ridges.

Don't know what you mean by "V shaped with ridges"
The belts are supposed to be 'V' shaped and some have relief grooves.
The belt should be 54 3/8"long x5/8" wide.
Check Napaonline.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
51 MERC-CT is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 02-02-2021, 08:10 AM   #3
BobR35
Senior Member
 
BobR35's Avatar
 
Join Date: Dec 2020
Location: Pt. St. Lucie, FL
Posts: 104
Default Re: Napa part number for 41 fan belt

Not sure if it's the same as my '35 = NAPA B54. It's 56 3/4" long.
BobR35 is offline   Reply With Quote
Old 02-02-2021, 01:51 PM   #4
Joe Immler
Senior Member
 
Join Date: Dec 2012
Location: Massillon, Ohio
Posts: 783
Default Re: Napa part number for 41 fan belt

I have a DAYCO No. 22528 belt on my '41. It fits perfect and has been on for 7 years now.
Joe Immler is offline   Reply With Quote
Old 02-02-2021, 01:54 PM   #5
wamnram
Senior Member
 
wamnram's Avatar
 
Join Date: May 2010
Location: San Tan Valley, Arizona
Posts: 210
Default Re: Napa part number for 41 fan belt

I forget who this came from, somebody here on the Barn nice enough to share it.
Attached Images
File Type: jpg Gates Belts.jpg (73.3 KB, 42 views)
__________________
Wayne
wamnram is offline   Reply With Quote
Old 02-02-2021, 01:59 PM   #6
marko39
Senior Member
 
Join Date: Oct 2016
Location: harpursville ny
Posts: 1,038
Default Re: Napa part number for 41 fan belt

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by wamnram View Post
I forget who this came from, somebody here on the Barn nice enough to share it.
It is easy to figure, B(size ) plus 3" equals true length. Thus a B54 measures about 57".
marko39 is offline   Reply With Quote
Old 02-02-2021, 02:20 PM   #7
Ziggster
Senior Member
 
Join Date: Aug 2018
Location: Ottawa, ON
Posts: 840
Default Re: Napa part number for 41 fan belt

Not sure if the 41 belt arrangement is the same as I have for my C59A, but for the crank/water pump/ generator belt I went with the Gates B54/55 belt. My crank pulley is no good so I can’t fit it onto the crankshaft to get an exact fit, but I think either will work with the generator adjustment range.
Ziggster is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:44 PM.