Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 02-26-2021, 12:57 PM   #1
JayJay
Senior Member
 
Join Date: Jan 2020
Location: SF Bay Area
Posts: 1,066
Default hange in Evaoprust formulation?

A question for you folks who use Evaporust:

I bought a couple of gallons maybe two years ago, and as I used it up I bought a couple more last fall. Well, I tapped into the new stuff today and noticed that it appears that the formulation has changed. Old stuff was light yellow and had a sweet smell. New stuff is clear, no odor and has bubbles when you pour it. I notice the label on the gallon container has changed slightly also. I have no reservations about using it (at least, until I see how well it works), but has anyone else noticed this?

BTW, the instructions say to use and reuse Evaporust until "it is no longer effective". At least with the old stuff, that seems to occur about the time the solution turns opaque black - not with sediment, but a dissolved color. Which leads me to believe that maybe the yellow is the dissolved active ingredient, and it has converted all of the active ingredient when the yellow is no longer present.

Thanks.

JayJay
__________________
JayJay
San Francisco Bay Area

------------------------
1930 Murray Town Sedan
1931 Briggs S/W Town Sedan
JayJay is offline   Reply With Quote
Old 02-26-2021, 02:25 PM   #2
Bill Cal.
Senior Member
 
Join Date: May 2010
Posts: 174
Default Re: hange in Evaoprust formulation?

Please let us know how well the new stuff works. Thanks
Bill Cal. is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 02-26-2021, 04:45 PM   #3
Oldbluoval
Senior Member
 
Oldbluoval's Avatar
 
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,370
Default Re: hange in Evaoprust formulation?

Yeah every time I get something that works and I like.....
They change it, discontinue, sub to China or it’s declared harmful or illegal!
I’m the kiss of death with many products
Even food, clothing..... you name it!
Oldbluoval is offline   Reply With Quote
Old 02-26-2021, 05:33 PM   #4
nkaminar
Senior Member
 
nkaminar's Avatar
 
Join Date: Jan 2012
Location: Western North Carolina
Posts: 3,889
Default Re: hange in Evaoprust formulation?

Mine is used up but I am afraid to pour it into my septic tank, even though it says it is perfectly harmless. Cannot just dump it in the creek either. Cannot use it to start a fire as it is non flammable. Any suggestions?
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
nkaminar is offline   Reply With Quote
Old 02-26-2021, 05:53 PM   #5
Oldbluoval
Senior Member
 
Oldbluoval's Avatar
 
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,370
Default Re: hange in Evaoprust formulation?

It is biodegradable but what it’s picked up in use likely/possibly is not .
If it’s only been used for derust and not picked up grease or oil, I’d just pour it out
Not real sure about septic but would pour in a sewer system
Oldbluoval is offline   Reply With Quote
Old 02-26-2021, 06:05 PM   #6
Synchro909
Senior Member
 
Synchro909's Avatar
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,488
Default Re: hange in Evaoprust formulation?

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Oldbluoval View Post
Yeah every time I get something that works and I like.....
They change it, discontinue, sub to China or it’s declared harmful or illegal!
I’m the kiss of death with many products
Even food, clothing..... you name it!
No, say it isn't so! You're not the kiss of death for this hobby, are you?
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood.
Synchro909 is offline   Reply With Quote
Old 02-26-2021, 06:50 PM   #7
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 6,340
Default Re: hange in Evaoprust formulation?

Grease and oil are the kiss of death to Evaporust. I don't think it would even absorb grease or oil, so would just be a shot of iron in the form of converted rust to those plants that like high iron soil.
__________________
I know the voices aren't real but damn they have some good ideas!
redmodelt is offline   Reply With Quote
Old 02-26-2021, 07:21 PM   #8
JayJay
Senior Member
 
Join Date: Jan 2020
Location: SF Bay Area
Posts: 1,066
Default Re: hange in Evaoprust formulation?

Quote:
Originally Posted by redmodelt View Post
Grease and oil are the kiss of death to Evaporust. I don't think it would even absorb grease or oil, so would just be a shot of iron in the form of converted rust to those plants that like high iron soil.
I run my parts through carburetor parts cleaner or lacquer thinner, then wash with soap and water, before I put them into the Evaporust. I've found the Evaporust doesn't penetrate any grease or oil, it needs just clean rust.

JayJay
__________________
JayJay
San Francisco Bay Area

------------------------
1930 Murray Town Sedan
1931 Briggs S/W Town Sedan
JayJay is offline   Reply With Quote
Old 02-26-2021, 08:21 PM   #9
dennis lumbert
Senior Member
 
dennis lumbert's Avatar
 
Join Date: Feb 2011
Location: central Arkansas
Posts: 150
Default Re: hange in Evaoprust formulation?

I just bought some evaporust a few weeks ago.Its a light yellow with no noticable smell to me.I used it to derust a zenith carb and it works very well.I let it soak a couple of days and the carb parts look like new.The used evaporust developed a foul smell but it sure did a good job. I'm happy. Dennis
dennis lumbert is offline   Reply With Quote
Old 02-26-2021, 09:16 PM   #10
Synchro909
Senior Member
 
Synchro909's Avatar
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,488
Default Re: hange in Evaoprust formulation?

Quote:
Originally Posted by redmodelt View Post
Grease and oil are the kiss of death to Evaporust. I don't think it would even absorb grease or oil, so would just be a shot of iron in the form of converted rust to those plants that like high iron soil.
To remove any oiliness from the cooling system before using something like this, drop a couple of dish washer tablets in there and go for a drive. I've seen laundry powder used but it foams up so much the engine may over heat. Not good!
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood.
Synchro909 is offline   Reply With Quote
Old 02-26-2021, 09:53 PM   #11
Big hammer
Senior Member
 
Join Date: Jun 2014
Location: Land of Lincoln
Posts: 3,126
Default Re: hange in Evaoprust formulation?

Don't put the lid back on your container to store slightly used Evaporust, it kills it, I've put a hole in the cap with a short piece of vacuum hose to let the Evaporust breath. Mark the level and if it evaporates and water.
__________________
Don't force it with a little hammer tap, tap, tap
get a bigger hammer tap done
Big hammer is online now   Reply With Quote
Old 02-27-2021, 07:50 AM   #12
Oldbluoval
Senior Member
 
Oldbluoval's Avatar
 
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,370
Default Re: hange in Evaoprust formulation?

Synchro.....” No, say it isn't so! You're not the kiss of death for this hobby, are you?”

Never say never.... check the decline on car prices!
Oldbluoval is offline   Reply With Quote
Old 02-27-2021, 04:01 PM   #13
GeneBob
Senior Member
 
Join Date: May 2017
Location: Denver Area
Posts: 433
Default Re: hange in Evaoprust formulation?

Old Blue, If you are the kiss of death for things, I want to thank you for getting into disco music, following the Kardshians and wearing pajamas in public.
GeneBob is offline   Reply With Quote
Old 02-28-2021, 06:39 AM   #14
Oldbluoval
Senior Member
 
Oldbluoval's Avatar
 
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,370
Default Re: hange in Evaoprust formulation?

I’m starting to take a liking to rap music!
Oldbluoval is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:30 PM.