|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-11-2018, 03:13 PM | #1 |
Senior Member
Join Date: Jul 2017
Location: Spokane, Washington state
Posts: 250
|
window door seal front side felt?
Hi,
This picture has the wind lace retainer on the left which helps seal the door window on the rear side. The other chrome part has a small slot maybe a bit less than 1/8 inch wide, and something like 1/4 or maybe longer that I think is supposed to have some weather strip felt like material glued into it. Any ideas of where to get the felt for the one on the right, or what is really was to restore it right? Thanks
__________________
68B frame# late May1930, fixed seat, Briggs build plate# & most parts, indicate July, or early Aug. 1930. Last edited by kimeccles; 09-12-2018 at 05:11 AM. |
09-14-2018, 07:06 AM | #2 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: window door seal front side felt?
the one on the left is for a Cabriolet, the other part, I do not recognize for the Cabriolet.
|
Sponsored Links (Register now to hide all advertisements) |
|
09-14-2018, 05:07 PM | #3 |
Senior Member
Join Date: Jul 2017
Location: Spokane, Washington state
Posts: 250
|
Re: window door seal front side felt?
Sponsored Links (Register now to hide all advertisements)
If anyone with a 29-1930 straight window Cabriolet has a picture of a front door window edge with the window down to show the channel, felt edge, and this adjacent part please post it or link me to one if you get a chance. Note it is not the same as a 31 slant window door or window molding or channel and as usual the parts are hard to find.. Thanks
__________________
68B frame# late May1930, fixed seat, Briggs build plate# & most parts, indicate July, or early Aug. 1930. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|